C02 tanks refill vs swap

Lighting, filtration etc
User avatar
FrannyB
Posts: 768
Joined: Mon Nov 24, 2003 3:00 pm
Real Name: Francine Bethea
Location: Gwynn Oak, MD 21207
Contact:

C02 tanks refill vs swap

Post by FrannyB »

It's time for me to refill my bottle. Can't really tell you size (lb) it is. It stands about 23". Anyway, will I have to swap it or will the company refill it for me? I bought it new and it's all nice and shiny. It doesn't fit under my tank so it's quite visible.

I also want to replace my regulator for a 2-stage. Do you have a cheaper source than GL?

Why won't the regulators for welding bottles work or will they. They can handle lower pressure. Shouldn't that prevent a dump?
Francine
Once you go Dutch you can't stop trimming.

http://www.capitalcichlids.org
User avatar
Cristy Keister
Posts: 2215
Joined: Sat Nov 29, 2003 6:52 am
Location: MD

Post by Cristy Keister »

for the refill, go to Laurel Bottled Gas on Rt 1. they refill instead of swapping. Robert's Oxygen in Laurel will only swap tanks and they don't normally have 5lb tanks, or pretty tanks.
User avatar
Jim Miller
Posts: 940
Joined: Mon Nov 29, 2010 10:16 pm
Location: Parkton, MD
Contact:

Post by Jim Miller »

I did my 2 stage by getting a regulator on Ebay and changing some parts. Took some wrenches and elbow grease. I think I have a bit over $60 into it.

Is that something you'd want to try? If so there's a good regulator on Ebay that I could recommend. I'd be glad to help where I could.

Jim
User avatar
jweis
Posts: 1507
Joined: Thu Feb 10, 2011 11:11 pm
Location: Ijamsville, MD

Post by jweis »

There is a paintball shop near the Frederick airport that will refill CO2 too. However my 10lb tank had a black handle that blocked the refil attachment, so it didn't work out for me, but if you have a tank wthout any obstrutions, the they should be able to fill you tank.
Julie
37g planted, 11g planted, and three 5.2g planted shrimp tanks.
User avatar
DonkeyFish
Posts: 1783
Joined: Fri Apr 27, 2007 4:42 pm
Real Name: Jen Williams
Location: Alexandria, VA
Contact:

Post by DonkeyFish »

I've been able to get roberts to refill my bottle, but that might not happen at all locations. Paintball shops and beverage/restaurant suppliers are options too if you're looking.

I got my regulator on ebay as well, not sure the source, but its a Milwaukee. Haven't had any issues with it other than the loose nut behind the wrench (me).
It is not murder if you're killing snails.
User avatar
Jim Miller
Posts: 940
Joined: Mon Nov 29, 2010 10:16 pm
Location: Parkton, MD
Contact:

Post by Jim Miller »

Fireline in Catonsville does refills. Nice folks.

Look for fire protection type stores in your area.

Jim
User avatar
Jim Miller
Posts: 940
Joined: Mon Nov 29, 2010 10:16 pm
Location: Parkton, MD
Contact:

Post by Jim Miller »

BTW, my offer to help with regulator builds stands for anyone. It takes a bit of time to collect all the parts but I'll do the work for free if you need help.

Jim
User avatar
chris_todd
Posts: 1118
Joined: Fri Oct 03, 2008 11:05 pm
Location: Catonsville

Post by chris_todd »

Jim Miller wrote:Fireline in Catonsville does refills. Nice folks.

Look for fire protection type stores in your area.

Jim
Holy cow, I had no idea there was a CO2 refill place so close to me! I've been going down to Laurel Bottled Gas. Thanks for the tip, Jim!
User avatar
FrannyB
Posts: 768
Joined: Mon Nov 24, 2003 3:00 pm
Real Name: Francine Bethea
Location: Gwynn Oak, MD 21207
Contact:

Post by FrannyB »

Thanks everyone.

My bottle has the black handle.

:lol: @Jen.

Jim could you point me in the right direction on which regulator to look for on ebay? I would appreciate a build if it comes to that.

Have we had a C02 regulator build talk yet?
Francine
Once you go Dutch you can't stop trimming.

http://www.capitalcichlids.org
User avatar
Jim Miller
Posts: 940
Joined: Mon Nov 29, 2010 10:16 pm
Location: Parkton, MD
Contact:

Post by Jim Miller »

This is the one I've been looking at (dare i say lusting after?) to buy as a backup. I'd be happy to help you with a build out on it.

http://cgi.ebay.com/VICTOR-EQUIPMENT-CO ... 7633177119

jim
Post Reply

Sponsors