The fun begins next weekend when I get started on the inside!
Dimensions of the top half 30 x 30 x 40" tall.
Dimensions of the stand 30 x 30 x 30"
Lit by 4 x 55W CF.
More pics later.....
All the plumbing is done from the bottom up.
Two 1/4 CPVC in the corners are for the drip system - 2 x 9 outlet Toro
One of the 1/4" CPVC lines is the for mister - MistKing Quad + 1.
the pump for which is located in the HVAC closet in the room
behind the wall.
Ventilation will be forced air - you cannot see the tubing for that in these
pics.
Mist from an ultrasonic fogger will also be pumped into the viv via the
ventilation system from time to time.
Dual paned front glass, with hot air off the bulbs pumped between them.
Its sealed on the inside with Marine epoxy. Several layers.
For access to the bulbs etc, the canopy lifts up like the hood of a car.
The entire front panel is detachable.
Cant wait to get this planted!
