Melting leaves on downoi

Discuss specific plants, general plant care, help setting up a plant tank, rare plants, and general help
Post Reply
User avatar
chris_todd
Posts: 1118
Joined: Fri Oct 03, 2008 11:05 pm
Location: Catonsville

Melting leaves on downoi

Post by chris_todd »

I planted some of the downoi we got from Viktor into a nano I had bought from Aaron, which has mineralized soil with ADA Amazonia on top. THis morning, as I was adding some Excel (no CO2 yet), I noticed a few of the lower leaves looking melted (just like crypt melt). Anyone know what causes this? Given the substrate, and that the tank is only a week or so old, I can't imagine there are nutrient deficiencies, and it has plenty of light.

I have not yet done a water change, and there are no fish or shrimp in the tank yet, just a few very small snails that apparently came in on the plants.
Attachments
Blyxa japonica on the left, rotala verticularis on the back right, downoi just in front of that, and dwarf sag in front of that on the right side.
Blyxa japonica on the left, rotala verticularis on the back right, downoi just in front of that, and dwarf sag in front of that on the right side.
IMGP1093.JPG (104.57 KiB) Viewed 2852 times
User avatar
eleontie
Posts: 471
Joined: Tue Aug 28, 2007 9:21 am
Location: arlington , VA
Contact:

Post by eleontie »

Downoi melted every time I tried to plant it ( more than one tank) . I believe water hardness has a very important role for this plant. As I remember it needs softer water.

Eugen
User avatar
Judi
Posts: 812
Joined: Sun Mar 18, 2007 9:48 pm
Real Name: Judi Hammett
Location: Catonsville, Maryland

Post by Judi »

Whenever I've transplanted Downoi from my nano to my 20 high, I've noticed that it goes through an acclimation period during which the lower leaves don't exactly melt, but don't look too happy either. Maybe that's what's going on here?

When I first planted Downoi in my nano, it took a very long time to really take off. It did better with diy co2 than just Excel, and the combination of co2 and Excel really made it go nuts.
User avatar
SCMurphy
Site Admin
Posts: 2104
Joined: Sun Nov 23, 2003 1:40 pm
Real Name: Sean
Location: Maryland United States

Post by SCMurphy »

Downoi does not need soft water.
"したくさ" Sean

Aquascape? I'm a crypt farmer.

If you've got bait, I've got wasabi!

I wish I could be like Mr. Sarcastic when I grow up! ;)
ingg
Posts: 2418
Joined: Fri Feb 16, 2007 1:29 am

Post by ingg »

Downoi is one of those tempermental plants for me.

Plant it once, melts. Plant it twice, melts. Plant it again, goes insane.... all in the same tank in the space of a coupla monts. It sometimes just gets angry, and I've never understood why!

One good trick I learned from... was either Sean or Ghazanfar... it readily floats and grows. If you are getting smaller stems, float them a while and they thicken up, then plant.
Dave
User avatar
chris_todd
Posts: 1118
Joined: Fri Oct 03, 2008 11:05 pm
Location: Catonsville

Post by chris_todd »

Thanks everyone for the info!

Judi, I'm definitely getting melting, rather than just looking ragged. Interestingly, we planted some in Amy's nano, which has EC capped by ColorQuartz, and it hasn't started melting yet that we can see. Nearly identical conditions, otherwise, though her tank is a little more mature (2-3 months old, instead of one week).

Sean and Eugen, it almost doesn't matter whether Downoi requires soft water or not, I refuse to go to the effort of softening or hardening water for my fish or plants. They'll get my tap water and like it, or I'll grow something else, LOL. It's just too much of a pain to customize my water, and at some point I'm guaranteed to screw it up and kill everything. :lol:

Dave, interesting tip on the floating first - I may try that.
dSerk
Posts: 84
Joined: Tue Jan 06, 2009 3:48 pm
Location: Annandale, VA

Post by dSerk »

chris_todd wrote:it almost doesn't matter whether Downoi requires soft water or not, I refuse to go to the effort of softening or hardening water for my fish or plants. They'll get my tap water and like it, or I'll grow something else, LOL. It's just too much of a pain to customize my water, and at some point I'm guaranteed to screw it up and kill everything.
Every other WC or so I add a gallon of distilled water in addition to my tap water. Adding too much is a bit of a shock to my fish, I think, but a little should keep the water from getting harder over time. There are a couple LFS that sell reverse osmosis water, often cheaper than grocery store distilled water. Anyway, not such a pain in the butt if you wanted to soften your water.
Dan Please, spay/neuter your Platys.
marydotson
Posts: 220
Joined: Thu Dec 23, 2004 12:43 pm
Location: United States
Contact:

Post by marydotson »

I got three stems in December and while it hasn't gone nuts, it does look nice. The lowest leaves did die, however, so I ended up removing leaves from the bottom inch or so. Also, I had a little difficulty keeping it planted, so I ended up weighting it. I use CO2 and daily dosing, but I haven't used any softer water than that which is regularly available from FX County...it is a pretty little plant (very nice color).
User avatar
chris_todd
Posts: 1118
Joined: Fri Oct 03, 2008 11:05 pm
Location: Catonsville

Post by chris_todd »

Mary, the melting has stopped, and only the bottom couple of leaves were lost. So that's good. Now, I'm just fighting this stringy hair-like algae... :evil:
Post Reply

Sponsors