Want to be sure I am not forgetting anything. Looked for a checklist online, no dice.
[Edit] Arrghhh...All that trying to be neat and use tabs and it fouled it all up, Sorry
Tank &n bsp; Ordered
Stand & nbsp; Ordered
Substrate
Eco-Complete Ordered
Tahitian Sand Ordered
Lighting
Fixture Ordered
Timer & nbsp; On Hand
CO2 Stuff
Regulator Ordered
Needle Valve Ordered
Solenoid Ordered
Bubble Counter Ordered
Reactor Need to acquire
CO2 Tank On Hand
Controller Ordered
Check Valve Ordered
CO2 Safe Tubing Ordered
Calibration 4.0 On Hand
Calibration 7.0 On Hand
Sump
Tank &n bsp;On hand
Bulkheads On hand
Drain Lines On Hand
Return Lines On Hand
Pumps & nbsp;One On Hand, One Ordered
Valves Need to aquire
Unions Need to acquire
Misc
Heaters   ; ; On Hand
Temp Controller Need to acquire
Thermometer On Hand
Net &nb sp;On Hand
Scraper On Hand
UV &nbs p;On Hand
RO/DI
Unit &n bsp;Need to acquire – Looking for a decent source
Storage Tank Need to acquire
Test Kits
pH &nbs p;On Hand
KH &nbs p;On Hand
GH &nbs p;On Hand
Ammonia   ; ; On Hand
Nitrite   ; ; On Hand
Nitrate   ; ; On Hand
Iron &n bsp;On Hand
Phosphate On Hand
Water Conditioners
Equilibrium On Hand
Discus Buffer On Hand
Neutral Reg On Hand
Fertilizers
Flourish On Hand
Flourish Trace On Hand
So what am I missing??
-*-*-*-*-
gnatster
<edited><editID>gnatster</editID><editDate>38084.0201388889</editDate></edited>
New Setup Checklist
- Ghazanfar Ghori
- Site Admin
- Posts: 3258
- Joined: Sun Nov 23, 2003 5:26 am
- Location: United States
Water changing gear? Maybe a pump/overflow setup
to move water from the holding tank to the sump
and from there to the drain? Buckets may be back
breaking in the long run.
Filter stuff? I mean, something to put in the
sump in the guise of filter media. Depending
on what media you use, some kind of holding
structure would be required perhaps.
-Ivo
to move water from the holding tank to the sump
and from there to the drain? Buckets may be back
breaking in the long run.
Filter stuff? I mean, something to put in the
sump in the guise of filter media. Depending
on what media you use, some kind of holding
structure would be required perhaps.
-Ivo